Shopping direction: Drill Batteries Shop > Drill Charger > Dewalt Charger

Dewalt XRP 7.2V-18V Ni-Cd/Ni-MH DC9096 Battery Charger DC9310

best battery for power tool Usually Ships in 2-7 working days     inquiry free
Images Battery Specifications Today's Price
Dewalt charger
Zoom Image
  • Model: DC9310
  • Input Voltage - 120Volt
  • Output Voltage - 7.2v-18v
  • Battery Type Charged - Ni-cd, Ni-MH
  • Charges in 1 hour or less
  • Automatic shut-off protects excessive discharge of vehicle's battery

On Sale: US $39.23

secure Easy and Secure Pay
moneyback 30-Day Money Back
warranty 1 Year Warranty

DeWalt DC9310 7.2-18V NiMh Lithium 110Volt Battery Charger


Dewalt battery charger Dewalt battery charger Dewalt battery charger Dewalt battery charger
  • Charging time: 120min for a 6000mAh battery, 100 minutes for a 4000mAh Battery,80 minutes for a 3000mAh battery, 60 minutes for a 2000mAh battery, 40 minutes for a 1500mAh Battery
  • Charges Push-In (Pod Style) DeWalt 7.2V - 18V NiCd/NiMH batteries so users only need one charger for multiple cordless products. (Does not charge Slide-On Batteries)
  • The DEWALT 3-stage charging system provides maximum run time and extends overall life of the battery
  • Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold Chargers DeWalt battery models: DC9096, DW9096 NiCads, NiMh batteries.
  • Compactible with:
    18V Battery: DC9096, DE9039, DE9503, DE9095, DE9096, DW9096, DW9095, DW9098, DE9098, DC390, DC390B, DC390K, DC390KA, DC390KB, DC390N, DC410, DC410KA, DC020, DC212, DC212B, DC212KA, DC212KB, DC212KZ, DC212N, DC213KB, DC330, DC330K, DC330KA, DC330KB, DC330N, DC380KA
    14.4V Battery: DC9091, DE9038, DE9091, DE9092, DE9094, DE9502, DW9091, DW9094
    12V Battery :DC9071, DW9071, DW9072, DE9071, DE9074, DE9075
    9.6V Battery : DW9062, DC9062, DW9061, DC9091, DE9062
    7.2V Battery: DE9057, DE9085, DW9057

Ways Of Repairing a Cordless Drill Charger

Cordless drills run primarily on a detachable and removable battery pack. When your cordless drill stops holding a charge, there are a few factors that come into play. But most commonly, you can trace the issue back to your battery pack or external battery charger. While you can rebuild the battery pack, it is a complex procedure. In many cases, you can solve the problem by repairing the battery charger itself.

  • Remove the battery pack from the charging unit. Do this by pressing on the release buttons on either side of the battery pack. Disconnect the charger's power cord from the nearest electrical outlet.
  • Blow out all dust and debris from within the charger's contacts with a can of compressed air. Use a medium-grit file to file down the contacts slightly. This is only to clean the charger's contacts of any accumulation of dirt or battery acid.
  • Apply some rubbing alcohol to a clean wash cloth or paper towel. Thoroughly wipe down the inside of the battery charger's compartment. Allow five minutes for the alcohol to dry.
  • Plug in the battery charger and insert the battery pack into the charger. You may have to remove and re-insert the battery pack several times before making a connection, depending on how much dirt has accumulated on the charger's contacts.

Refer any major electrical repairs to a power tool repair technician. Dismantling the charger yourself will void your drill's warranty.

More Drill Batteries Articles