Shopping direction: Drill Batteries Shop > Drill Charger > Paslode 6V Charger

Paslode Battery Charger 900200, 404717 900420 Framing, 902000,900600 Nailer

best battery for power tool Usually Ships in 2-7 working days     inquiry free
Images Battery Specifications Today's Price
Paslode charger
Zoom Image
  • For Battery Type: Ni-Cd Ni-MH
  • Input: 110V AC 60Hz 19W
  • Output: 12V DC 800mA
  • For Brand: Paslode
  • Color: Black
  • Brand New: A brand-new, unused, unopened, undamaged item in its original packaging

On Sale: US $44.97

secure Easy and Secure Pay
moneyback 30-Day Money Back
warranty 1 Year Warranty

NEW Paslode Battery Charger for 404717 6V Battery

Paslode 6V charger Paslode 6V charger Paslode 6V charger Paslode 6V charger

INCLUDES (1) NEW BATTERY CHARGER BASE PART #901230 AND (1) NEW 120 VOLT AC ADAPTOR

THIS CHARGER IS FOR THE 404717 BATTERY WHICH WORKS WITH FRAMING NAILER 900420, STRAIGHT FINISH NAILER 902000, ANGLED FINISH NAILER 900600 AND 18G BRAD NAILER 901000


Cordless Drill Battery for PASLODE 404717
Paslode 6V Battery
Zoom Image
  • Type: Ni-MH
  • Volt: 6V
  • Capacity: 3000mAh
  • Color: Black
  • Weight: 309.25g
  • Dimension: 134.60 x 49.40 x 28.10mm

Ways Of Repairing a Cordless Drill Charger

Cordless drills run primarily on a detachable and removable battery pack. When your cordless drill stops holding a charge, there are a few factors that come into play. But most commonly, you can trace the issue back to your battery pack or external battery charger. While you can rebuild the battery pack, it is a complex procedure. In many cases, you can solve the problem by repairing the battery charger itself.

  • Remove the battery pack from the charging unit. Do this by pressing on the release buttons on either side of the battery pack. Disconnect the charger's power cord from the nearest electrical outlet.
  • Blow out all dust and debris from within the charger's contacts with a can of compressed air. Use a medium-grit file to file down the contacts slightly. This is only to clean the charger's contacts of any accumulation of dirt or battery acid.
  • Apply some rubbing alcohol to a clean wash cloth or paper towel. Thoroughly wipe down the inside of the battery charger's compartment. Allow five minutes for the alcohol to dry.
  • Plug in the battery charger and insert the battery pack into the charger. You may have to remove and re-insert the battery pack several times before making a connection, depending on how much dirt has accumulated on the charger's contacts.

Refer any major electrical repairs to a power tool repair technician. Dismantling the charger yourself will void your drill's warranty.

More Drill Batteries Articles